1. Re-bled all the brakes - Correctly this time in criss-cross pattern; RR then LF; LR then RF WITH THE CAR RUNNING - VERY IMPORTANT. FINALLY I HAVE SUCCESS AND THE BRAKE LIGHT WENT OFF ON RESTART ! BRAKES ARE GREAT NOW !

Service Performed 11/25/2004 - 11/28/2004:

1. Replaced Alternator; fixed sputtering/hesitation problem; still need to get it checked while on the car but can't until my brakes are finished.
   Alternator TESTING thread: "Who can you trust to test your alternator?"
    
2. Replaced all 4 rotors, Front/Rear pads, cleaned shims/calipers, flushed brake fluid. Didn't have the jack for the steel lines & speed bleeders. I need to rebleed my brakes. Didn't do it right. Have to wait for the time again.
   Brake threads: "Brake help needed", "Brake light still on after pad replacement and flush", Brake & Suspension system overhaul @ 135K - Possible Bible?"
3. Replaced PCV valve

Yet to come soon:

1. Replace ATX shift lever bushing
2. Remove/inspect ECM caps; replace caps if necessary or get new ECM
3. Remove/Clean Throttle body thoroughly
4. Remove/Clean Plenum Upper/Lower
5. Run Seafoam thru entire system